Stair Railings Suffolk County – Read Even Further To Help With Making A Qualified Final Choice..

Should you be purchasing a stair with balusters in a contrasting material, including painted balusters on an oak stair, questions will more than likely arise concerning the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters fitted once the stair is finished?

Here are some points to consider with Stair Company Suffolk County: Your painter will normally choose painting the balusters before installation. This enables them to be sprayed rather than brushed and eliminates plenty of “cut-in” work.

Painting balusters separately does mean that this stair installers will need to return to the website, eliminate the railings and install the balusters. You will have charge for this particular “second trip” for the jobsite. You will have to remember to schedule this “second trip” in coordination using the finishing of the finish.

Leaving your balusters out for painting implies that they are more inclined to be lost or stolen during this time. You will be responsible for balusters left on the jobsite. After the painted balusters are finally installed, there will be additional “touch-up finishing required in the rail joints. Holes will have to be filled and stain and complete re-applied for the ultimate finish.

Plan installation of your hardwood stair for after your drywall has been taped, sanded, and primed. The drywall process can damage the stair. Drywall mud and paint overspray will make the stair finishing process extremely tough and may also make desired results impossible to accomplish.

Most hardwoods are an open grain wood and once dirt gets a part of open grain it is very challenging to remove, despite having sanding. This can use a negative effect on the appearance and texture in the finish. Care must also be used to guard the stair from dirt and mud.

Never Cover Hardwood Stairs With Plastic. Plastic fails to allow airflow, trapping moisture underneath and resulting in the wood to grow and contract. This expansion and contraction causes the wood joints to open up and could result in the wood to crack.

The environmental conditions indoors are important to the standard of the stair. Hardwood lumber has become dried via a very controlled process to an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the average home and allows the wood to remain stable under normal conditions.

In cold climates, when a property is heated to some high temperature during winter, the air may become very dry, creating the wood to shrink. This shrinkage could make cracks visible in the wood and joints may begin to start up. Subjecting a stair to high levels of heat is like putting it inside an oven and can accelerate the deterioration in the stair.

All hardwoods has to be sealed on all sides to retard movement and protect from being exposed to elements and damage. It is strongly recommended to seal wood immediately.

Leave a Reply

Your email address will not be published. Required fields are marked *